Questions and Answers Related to Packaging Machinery
Release time:
2023-10-27
The heater's circuit goes through a magnetic switch before reaching the heating tube
1. What is the reason for the shrink machine to heat up slowly or fail to reach a higher temperature (above 160 degrees Celsius)?
Answer: The heater's circuit goes through a magnetic switch before reaching the heating tube, so first check if the contacts of the magnetic switch are normal. If the circuit does not pass through one of the phases, the above phenomenon will occur.
If the magnetic switch is normal, check the meter to see if the resistance values of each phase match the machine. If normal, it should be a short circuit; if all phases are connected but the circuit or heating tube is still abnormal, the heater needs to be replaced.
2. How to adjust when the film material easily shifts and cannot be fed normally during the operation of the LSA model?
Answer: In the L-type model, if the film material shifts and adjusting the film roll position and tension balance rod is ineffective, you can solve this problem by adjusting the angle of the upper triangular plate.
If the upper film material deviates from the clamping chain, adjust the upper triangular plate clockwise; if the lower film material deviates from the clamping chain, adjust the upper triangular plate counterclockwise.
3. When packaging 6 bottles in a bundle with the LSA-504C model, the photoelectric sensor cannot detect the packaging, and the machine easily cuts into the packaging. How should it be adjusted?
Answer: The gaps between the bottles in the bundled packaging can affect the detection of the photoelectric sensor. In this case, adjust the angle of the horizontal photoelectric sensor to an oblique angle. After adjustment, it can reduce the chances of the photoelectric sensor detecting gaps in the packaging, thus avoiding the chaotic cutting phenomenon during operation.
Related News
Japan's authoritative machine tool exhibition
2024-11-07
PMI has remained in a growth phase for two consecutive months
2024-07-01
Machine Tool World: Analysis of Types and Processing Capabilities
2024-07-01
Analysis of the CNC Machine Tool Industry
2024-07-01
The advantages of bagging machines include
2023-10-27
Questions and Answers Related to Packaging Machinery
2023-10-27
Contact Us
Address: No.80, Huasheng Village, Yuhuan County, Taizhou City, Zhejiang Province
Yundong CNC Address: Exit of Jingwuhuang and Jingwuchang expressways in the north of Wuyuan County
Mobile phone (WeChat):
86-13586261542 (Manager Sun)
86-17770338778 (Manager Hu)
E-mail:1300552380@qq.com